How to simulate ngl fractionation: single-shell petlyuk dividing-wall column
A natural-gas-liquids cut (ethane / propane / n-butane) split into three on-spec products by ONE thermally-coupled dividing-wall column instead of two columns in series. This uses the native Petlyuk unit op: a prefractionator whose reflux and boilup are supplied by the main column (the single condenser + single reboiler), solved by an outer Wegstein loop that converges the bidirectional vapor/liquid coupling to self-consistency — the coupling legacy sequential-modular solvers approximate with two connected columns whose recycle fails to converge.
- 1Open the ready-made model
Open the "NGL fractionation: single-shell Petlyuk dividing-wall column" model in the MaximaLabs workspace — no install, no license. It loads live on the canvas, ready to edit and run.
- 2Confirm the thermodynamics
This process is modeled with the PENG-ROBINSON property package over ethane, propane, n_butane — already selected, so the phase equilibrium and enthalpy are physically consistent from the first run.
- 3Review the flowsheet
The flowsheet chains DWC. Every block is a real, solvable unit op you can reconfigure on the canvas.
- 4Run the simulation
Click Run. The deterministic solver converges the material and energy balances (recycles included) and fills the live stream table — the AI never invents a number.
- 5Read the results and iterate
Inspect the converged streams, tweak a spec, and re-run — or ask the AI copilot to explain a result or diagnose a failed solve in plain English.
- Thermodynamics
- PENG-ROBINSON
- Components
- ethane, propane, n_butane
- Unit operations
- DWC
Opens live on the canvas — free, no install.
Explore the model & flowsheetModeling assumptions & limitations
What this model captures, and what it deliberately does not — from the engineers who built it.
- 1The vapor-split and liquid-split ratios are specified inputs (not solved from tray hydraulics), and this is an outer-loop coupling of two rigorous MESH sub-solves, not a single monolithic Petlyuk MESH.
Frequently asked questions
- What does the NGL fractionation: single-shell Petlyuk dividing-wall column model simulate?
- A natural-gas-liquids cut (ethane / propane / n-butane) split into three on-spec products by ONE thermally-coupled dividing-wall column instead of two columns in series. This uses the native Petlyuk unit op: a prefractionator whose reflux and boilup are supplied by the main column (the single condenser + single reboiler), solved by an outer Wegstein loop that converges the bidirectional vapor/liquid coupling to self-consistency — the coupling legacy sequential-modular solvers approximate with two connected columns whose recycle fails to converge.
- Which thermodynamic method does it use?
- The PENG-ROBINSON property package, over ethane, propane, n_butane — already selected. You can switch the method on the canvas before running.
- Which unit operations are in the flowsheet?
- It chains DWC. Every block is a real, solvable unit operation you can reconfigure, add to, or remove.
- Do I need to install software or buy a license?
- No. NGL fractionation: single-shell Petlyuk dividing-wall column runs entirely in your browser on MaximaLabs — free, no install, no license. Open the model to load it live and run the deterministic solver.
More guides like this
BTX separation via dividing-wall column
Benzene/toluene/ethylbenzene split into three purified products by a single rigorous dividing-wall column (prefractionator + two coupled main columns) instead of two ordinary columns in series — the thermally-coupled route real DWC retrofits use.
Natural gas fractionation train
A four-column NGL fractionation train — demethanizer, deethanizer, depropanizer, debutanizer — recovering pipeline-spec sales gas plus ethane, propane, and butane products from wellhead-pressure raw natural gas, after Luyben (Ind. Eng. Chem. Res. 2013, 52, 10741).
Light-ends fractionation train
A classic three-column light-ends train splitting an ethane/propane/ n-butane/n-pentane feed into four near-pure products: DEC2 (deethanizer, 5 bar) rejects ethane overhead, DEC3 (depropanizer, 5 bar) takes the propane cut, and DEC4 (debutanizer, 2 bar) splits n-butane from n-pentane. A genuinely wide-boiling train — DEC2 and DEC4 both land in the documented successive-substitution residual plateau (converge to a physically correct, sharp separation just above the strict 1e-5 tolerance) rather than a clean converged status, the same class of behavior already accepted for the DME casebook entry. From the ChemSep casebook (light-ends fractionation).
Reformate splitter via dividing-wall column
A refinery catalytic-reformer stream (benzene/toluene/o-xylene plus a non-aromatic n-heptane proxy) is split into three purified aromatics cuts by a single thermally-coupled dividing-wall column instead of two ordinary columns in series — the same DWC economics as the BTX example, applied to a genuine reformate splitter duty. Dejanovic, Matijasevic, Jansen, Olujic, "Designing a Packed Dividing Wall Column for an Aromatics Processing Plant," Ind. Eng. Chem. Res. 2011, 50, 5680.
Depropanizer (NGL fractionation)
The raw NGL recovered by a cold separator is fractionated: a depropanizer column splits it into a C₃-and-lighter overhead (propane + a little ethane, the LPG product) and a C4+ bottoms (butanes + natural gasoline). The column is solved with the component-flow Naphtali-Sandholm MESH (method "ns"), which carries every component flow as an unknown so the feed-vs-products material balance is an equation the solver closes by construction — the right tool for a sharp C₃/C₄ cut, where a reduced-form column would drag the split off and leak a few percent of a component. Peng-Robinson handles the light-hydrocarbon VLE; the built-in sensitivity sweeps the reflux ratio against the reboiler duty (the classic distillation energy trade-off).
NGL fractionation train (depropanizer + debutanizer)
The full two-column NGL fractionation train of a gas plant: a raw NGL is split into three products. The depropanizer takes a propane-and-lighter overhead (the propane product), and its C4+ bottoms feed a debutanizer that splits butane overhead from a natural-gasoline (C5+) bottoms. Both columns use the component-flow Naphtali-Sandholm MESH (method "ns") so each sharp cut conserves every component exactly; the two columns solve in sequence (no recycle) and the whole train closes on mass. Peng-Robinson handles light-hydrocarbon VLE; the debutanizer runs at a lower pressure (7 bar vs 18) so its reboiler stays within a reasonable temperature.