How to simulate propane refrigeration cycle
A single-stage vapor-compression refrigeration loop: propane vapor is compressed, condensed to subcooled liquid, throttled through a valve, and superheated back to vapor in the evaporator before recycling — a small makeup feed and purge close the mass balance (inspired by ChemSep's Refrigeration_* reference cases).
- 1Open the ready-made model
Open the "Propane refrigeration cycle" model in the MaximaLabs workspace — no install, no license. It loads live on the canvas, ready to edit and run.
- 2Confirm the thermodynamics
This process is modeled with the COOLPROP property package over propane — already selected, so the phase equilibrium and enthalpy are physically consistent from the first run.
- 3Review the flowsheet
The flowsheet chains MIX, COMP, 2× EVAP, Valve, Split. Every block is a real, solvable unit op you can reconfigure on the canvas.
- 4Run the simulation
Click Run. The deterministic solver converges the material and energy balances (recycles included) and fills the live stream table — the AI never invents a number.
- 5Read the results and iterate
Inspect the converged streams, tweak a spec, and re-run — or ask the AI copilot to explain a result or diagnose a failed solve in plain English.
- Thermodynamics
- COOLPROP
- Components
- propane
- Unit operations
- MIXCOMP2× EVAPValveSplit
Opens live on the canvas — free, no install.
Explore the model & flowsheetFrequently asked questions
- What does the Propane refrigeration cycle model simulate?
- A single-stage vapor-compression refrigeration loop: propane vapor is compressed, condensed to subcooled liquid, throttled through a valve, and superheated back to vapor in the evaporator before recycling — a small makeup feed and purge close the mass balance (inspired by ChemSep's Refrigeration_* reference cases).
- Which thermodynamic method does it use?
- The COOLPROP property package, over propane — already selected. You can switch the method on the canvas before running.
- Which unit operations are in the flowsheet?
- It chains MIX, COMP, 2× EVAP, Valve, Split. Every block is a real, solvable unit operation you can reconfigure, add to, or remove.
- Do I need to install software or buy a license?
- No. Propane refrigeration cycle runs entirely in your browser on MaximaLabs — free, no install, no license. Open the model to load it live and run the deterministic solver.
More guides like this
Ammonia refrigeration cycle
A single-stage vapor-compression refrigeration loop using ammonia — the classic industrial (rather than HFC) refrigerant — condensed to subcooled liquid, throttled through a valve, and superheated back to vapor in the evaporator before recycling (inspired by ChemSep's Refrigeration_Ammonia-30C reference case).
Helium liquefaction (Linde-Hampson cycle)
A Joule-Thomson liquefaction loop: helium is compressed, aftercooled, precooled well below its ~40-51 K JT-inversion temperature, then throttled through a valve into a flash drum that draws off liquid helium while the cold vapor recycles back to the compressor suction — the same JT-cycle physics as the platform's LNG/refrigeration loops, run on a fluid whose inversion curve makes precooling mandatory before the throttle can cool it at all.
Deep ethane recovery with propane-refrigerated feed chilling
Associated gas is chilled by an external propane refrigeration package before a demethanizer recovers ethane and heavier as NGL bottoms from a methane-rich residue gas overhead — the cryogenic-chilling role Ortloff's CCS/GSP processes play ahead of the turboexpander in a real deep-ethane-recovery plant. The mechanical refrigeration loop itself (compressor/condenser/valve) isn't separately modeled here; the chiller's duty is represented directly as the feed's cooled outlet temperature (the same honest-simplification pattern used for LNG cold-box examples elsewhere in this library).
LOHC hydrogen release (methylcyclohexane dehydrogenation)
A liquid organic hydrogen carrier (LOHC) power train: methylcyclohexane (MCH) is preheated and catalytically dehydrogenated (MCH → toluene + 3H2, endothermic, equilibrium-limited to ~90% single-pass conversion) to release hydrogen for downstream power generation. A flash drum separates the H₂-rich gas from the liquid; a distillation column then recovers the unreacted MCH overhead and recycles it to the reactor feed, closing a real tight liquid recycle loop, while spent toluene leaves the bottoms (to be re-hydrogenated back to MCH off-site, closing the supply-chain loop — out of scope for this dehydrogenation-side flowsheet). Screening-fidelity note: MCH and toluene are genuinely close-boiling (relative volatility ~1.4 under this thermo package at column conditions), so the recycle carries real toluene along with the recovered MCH rather than a sharp cut — a production column would use more stages to purify it further; this shows the recycle topology and its convergence, not an optimized column design.
Recycle loop
A mixer/heater/splitter loop with a tear stream — exercises Wegstein recycle convergence.
Ammonia refrigeration (−30 °C)
A closed single-stage ammonia vapor-compression cycle serving a −30 °C load: compressor → ambient condenser → JT valve → evaporator. The charge is set via tear_specs; metrics give duty and work (COP ≈ 2). From the ChemSep casebook (Refrigeration_Ammonia-30C).