Esterification Process Flowsheets & Simulations
Explore 3 validated, solved Esterification simulation flowsheets in MaximaLabs — real components: acetic_acid, methanol, methyl_acetate, water, lactic_acid, methyl_lactate. Open any one directly in your browser.
Solved via: NRTL, PSRK.
Methyl acetate esterification via reactive distillation
Acetic acid and methanol esterify over the reactive stages of a column into methyl acetate and water — a genuine quadruple-azeotrope system where reactive distillation intensifies what would otherwise need several conventional columns. Reactive Distillation Design and Control, Luyben & Yu, Wiley (2006), pp. 147-164.
5 unit ops • NRTL
221 0
View & openPatent benchmark: methyl lactate synthesis (CN104628563A)
Real patent replication, not an invented process: CN104628563A's acid-catalyzed lactate-ester route — lactic acid esterified with excess methanol, then purified by vacuum distillation — reproduced here as a continuous flowsheet. The patent's own worked methyl-lactate example reports 98.8% esterification conversion and 99.6% product purity at 120 degC/3h. This flowsheet's reactor conversion is set directly to the patent's reported 98.8% (not fitted); the vacuum column (0.2 atm, matching the patent's vacuum-distillation purification step) then splits the methanol and reaction water off the ester completely — zero methyl lactate leaves overhead — and delivers 97.8 mol% methyl lactate in the bottoms at 389.9 K. The property method is the whole story here, exactly as it was on the sulfolane extractive column. Written on Peng-Robinson, this example did not converge at all: every pair in a methanol / water / lactic-acid / methyl-lactate mixture is hydrogen-bonding, which van der Waals mixing cannot represent, and the column returned a partial profile carrying 2.60 mol/s of methyl lactate out of a column fed 1.98 — 32% more product than the reactor made, a 0.26 component-balance residual. (That wrong profile is where this example's previously-published 98.75% purity was read from; the number was retracted at the test level and is now corrected here.) A plain activity model cannot be used either, for a data reason rather than a physics one: neither lactic acid nor methyl lactate carries a regressed ideal-gas-Cp correlation, and the gamma-phi enthalpy path raises on that where a cubic quietly falls back to a corresponding-states estimate. PSRK is a cubic whose mixing is driven by UNIFAC, so it has both — and it converges to a 2.7e-06 component-balance residual, with methyl lactate and lactic acid each leaving in exactly the amount the reactor made.
5 unit ops • PSRK
223 0
View & openBatch campaign: a batch step inside a continuous flowsheet
Fine chemicals and pharma run batches, but a flowsheet is written in mol/s. These two unit ops reconcile that: they integrate the real batch physics over the batch, then report the products as the RATE that campaign delivers, so a batch step sits inside a continuous flowsheet the way a plant actually runs one. The batch reactor esterifies ethanol with acetic acid to ethyl acetate and water. It reaches 63.2% conversion and stops, and that number is not a specification — it is the equilibrium. The reaction is reversible with an equilibrium constant of 4 (the forward and reverse pre-exponentials are given as 5.0e4 and 1.25e4), and solving K = x(0.10+x)/(0.45-x)^2 = 4 for an equimolar charge carrying 10% water gives an extent of 0.285, which is 63.3% of the acid. Fischer esterification really does plateau there; a model that ran to completion would be describing a different reaction. Turnaround time costs throughput exactly as reaction time does. Two hours of reaction plus one hour of turnaround is a 3-hour cycle and 2922 batches a year, and the reactor is only reacting for 67% of the time it is occupied. That fraction is the number that decides whether you need a second reactor, and it is invisible to a steady-state model. The batch still then takes the crude and recovers the ethyl acetate — the distillate comes off essentially pure, from a pot that started at 28.5 mol% ester — on its own longer 4-hour cycle, so the two units run at genuinely different campaign rates. Bounded: the flowsheet sees each unit's CYCLE AVERAGE, not the transient. A real plant has a surge tank between these two smoothing the pulses, and neither the concentration profile during the batch nor the still's changing overhead composition is visible downstream.
5 unit ops • NRTL
69 0
View & open