Fiber-grade Process Flowsheets & Simulations
Explore 2 validated, solved Fiber-grade simulation flowsheets in MaximaLabs — real components: ethylene, oxygen, ethylene_oxide, co2, water, ethylene_glycol. Open any one directly in your browser.
Solved via: PENG-ROBINSON.
Ethylene glycol plant: fiber-grade MEG + DEG/TEG byproducts
Extends the EO/glycol chain all the way to separated products. Ethylene + O₂ make ethylene oxide over a silver catalyst (with the competing total-combustion side reaction), EO condenses out, and then hydrates through the real CONSECUTIVE glycol reactions — EO + H₂O → MEG, EO + MEG → DEG, EO + DEG → TEG (all atom-balanced, keyed on the shrinking EO pool) — giving the industrial ~90/9/1 mono-/di-/tri-ethylene-glycol selectivity that a high water:EO ratio produces. The purification train recovers the water for recycle and splits the glycols into fiber-grade MEG (>=99.9%), DEG, and TEG products. HONEST SCOPE: the reaction chemistry is rigorous stoichiometry (real atom balances, realistic selectivity set by the fixed conversions); the PURIFICATION is modelled with spec-based component-split separators to the known product purities (the Aspen 'Sep'-block technique for a well-understood separation section), NOT rigorous vacuum distillation columns — a converged 99.9%-fiber-grade MEG column is not tractable in this solver under Peng-Robinson (the MEG/DEG relative volatility is too narrow for the wide-boiling MESH path; a real plant uses large multi-effect evaporators + vacuum columns). The water-recycle stream is left open (not looped back) — an honest simplification, like the parent EO example's ethylene recycle.
23 unit ops • PENG-ROBINSON
224 0
View & openEthylene glycol plant: closed water loop + multi-effect evaporator dehydration
The water-integrated evolution of the fiber-grade MEG plant. Two changes turn the once-through EO/glycol chain into a real, water-economical process: (1) the recovered process water is RECYCLED back to the hydration reactors through a purge splitter. A pure recycle is inventory-singular (reactors are keyed on the shrinking EO pool, so water consumption is fixed regardless of how much water circulates), so an 8% purge pins the loop and makes it well-posed, cutting fresh water makeup from 10 to ~1.75 mol/s (a >80% reduction). (2) The bulk dehydration is done by a genuine TWO-EFFECT EVAPORATOR TRAIN (forward-feed, real steam economy: effect 1's low-temperature vapor is the heating steam for effect 2) doing rigorous (P,H)-flash water removal, rather than a single spec-based split. The recycle converges through the solver's Wegstein tearing (~15 outer passes) and MEG still comes out fiber-grade (>=99.9%). HONEST SCOPE: the reaction chemistry is rigorous stoichiometry (real atom balances, ~90/9/1 selectivity) and the evaporators are real energy-balanced flash effects — but flash evaporation CANNOT reach glycol dryness without slipping glycol into the overhead vapor (MEG has a real vapor pressure at 90 C), so the evaporators run cool and only pre-concentrate. An overhead knockout returns the ~1-2% slipped glycol to the product (no yield loss), and a final vacuum-refining polish (still a spec-based split, representing the refluxed dehydration column a flash cannot replicate) removes the last water. This mirrors a real MEG plant's multi-effect-evaporator + vacuum-refining dehydration section. The product columns remain spec-based (a converged 99.9% fiber-grade MEG column is not tractable under Peng-Robinson here — the MEG/DEG relative volatility is too narrow for the wide-boiling MESH path).
32 unit ops • PENG-ROBINSON
225 4
View & open