Joule-Thomson Process Flowsheets & Simulations
Explore 2 validated, solved Joule-Thomson simulation flowsheets in MaximaLabs — real components: helium, h2. Open any one directly in your browser.
Solved via: COOLPROP.
Helium liquefaction (Linde-Hampson cycle)
A Joule-Thomson liquefaction loop: helium is compressed, aftercooled, precooled well below its ~40-51 K JT-inversion temperature, then throttled through a valve into a flash drum that draws off liquid helium while the cold vapor recycles back to the compressor suction — the same JT-cycle physics as the platform's LNG/refrigeration loops, run on a fluid whose inversion curve makes precooling mandatory before the throttle can cool it at all.
8 unit ops • COOLPROP
222 0
View & openHydrogen liquefaction with catalytic ortho-para conversion
A Linde-Hampson JT-cycle liquefaction loop for H₂ (the same recycle topology as helium-liquefaction), but H₂'s real liquefaction process needs one more step helium doesn't: normal H₂ feed is ~75% ortho-/25% para-spin-isomer, while the equilibrium mix at liquid-H₂ temperature is ~99.8% para — liquefying without converting first leaves the ortho fraction far above its new equilibrium value, and its slow natural relaxation releases heat (the textbook explanation for uncatalyzed LH2 tanks self-boiling). This closes a real gap: (a catalytic cold-box converter, real equilibrium-para-fraction statistical mechanics) existed in MaximaLabs but was never wired into a showcase example — and turned out to also be missing from the backend's unit-type validation catalog entirely (fixed alongside this example,). Precooling to 30 K (deep enough that H₂'s JT effect actually condenses it — verified numerically: 77 K/60 K/45 K precool all give zero liquid yield at 20 atm → 1.3 atm here, since H₂'s JT-cooling window needs real precooling well below LN2 temperature, unlike simpler gases) also happens to sit right where the ortho-para conversion actually matters.
9 unit ops • COOLPROP
191 1
View & open