Rankine cycle Process Flowsheets & Simulations
Explore 2 validated, solved Rankine cycle simulation flowsheets in MaximaLabs — real components: r245fa, n2, co2, oxygen, water. Open any one directly in your browser.
Solved via: PENG-ROBINSON, STEAM.
Organic Rankine Cycle — marine diesel exhaust waste-heat recovery
A closed R245fa Rankine loop recovers waste heat from a heavy marine diesel engine's exhaust: a two-stream boiler vaporizes the working fluid against the hot exhaust gas, a real isentropic-efficiency turbine expands it to shaft power, an ambient-cooled condenser returns it to saturated liquid, and a pump restores boiler pressure. The exhaust-gas composition is a representative combustion-product mix (N₂/CO₂/O₂/H₂O), not a specific engine's measured flue analysis.
6 unit ops • PENG-ROBINSON
225 0
View & openRankine steam power cycle (pump -> boiler -> turbine -> condenser)
The classic steam power cycle behind most of the world's electricity, on the rigorous IAPWS-97 steam properties. Feedwater is pressurized by a boiler-feed pump, fired to superheated steam in the boiler, expanded through a steam turbine to make shaft power, then condensed back to water in the surface condenser. The four Rankine components appear in order, and the numbers are the real thermodynamic ones: at 60 bar / 500 degC steam expanding to a 0.1-bar condenser vacuum the turbine makes ~18 MW of shaft work at 85% isentropic efficiency, the exhaust leaves the turbine as wet steam (~92% quality, the classic low-pressure blade-erosion concern), the condenser rejects ~40 MW to cooling water, and the feed pump costs only ~0.15 MW (the small back-work ratio that makes the Rankine cycle practical, since pressurizing a liquid is nearly free next to expanding a gas). Cycle thermal efficiency comes out ~28%. Every property (the superheat enthalpy, the isentropic expansion endpoint, the exhaust steam quality) is the real IAPWS steam-table value, not a correlation.
6 unit ops • STEAM
167 1
View & open