MaximaLabs
Back to gallery

Solvent extraction Process Flowsheets & Simulations

Explore 2 validated, solved Solvent extraction simulation flowsheets in MaximaLabs — real components: water, co, ni, mg, kerosene, h2so4. Open any one directly in your browser.

Solved via: BRINE.

Leach Liquor
Organic FEED
feed
solv
ext
raff
Extract Stage
NI Raffinate
Strip Liquor
feed
solv
ext
raff
Strip Stage
Cobalt Strip Liquor
Regenerated Organic
Murrin Murrin nickel-cobalt laterite operation, Western Australia

Cobalt/nickel solvent extraction (D2EHPA)

A laterite leach liquor (Co/Ni/Mg in dilute sulfate solution) meets a D2EHPA-in-kerosene organic phase across a 20-stage countercurrent extraction circuit run at pH 5.2 — the real industrial operating window (e.g. Bulong, Murrin Murrin, Western Australia) that exploits the ~1 pH-unit gap between Co and Ni's D2EHPA extraction isotherms: Co extracts into the organic while Ni (and Mg gangue) are rejected to the raffinate. The loaded organic then meets fresh dilute-acid strip liquor across a 10-stage strip circuit at pH 1.0 (well below Co's isotherm), reversing the equilibrium to recover a concentrated cobalt strip liquor and regenerate barren organic. Real pH-isotherm chemistry throughout, not a fitted shortcut K_D.

8 unit ops • BRINE

239 0

View & open
Fast convergence
Blackmass
ACID
solid
acid
PLS
residue
Leach
Residue Product
Organic FEED
feed
solv
ext
raff
SX
Impurity Extract Product
BPED
feed
solid
liq
Cryst
LIOH Crystal Product
Mother Liquor Product
Nashville, Tennessee, USA

Battery black-mass recycling: leach -> SX -> BPED -> LiOH crystallization

Spent-battery black mass (an NMC111-like LiNi1/3Mn1/3Co1/3O2 lump, sulfuric acid-leached at a screening-level yield/stoichiometry — see the stated scope) dissolves into a pregnant leach solution carrying Li/Co/Ni/Mn. A 15-stage D2EHPA solvent-extraction circuit (the same real pH-isotherm chemistry the co-ni-solvent-extraction example uses, operated at pH 7.5 — above every curated Co/Ni/Mn pH50 — so all three transition metals extract into the kerosene organic phase while Li, which has no curated D2EHPA isotherm, stays in the aqueous raffinate untouched) purifies the liquor before it ever reaches the lithium-recovery chemistry. A Faraday's-law bipolar-membrane electrodialysis (BPED) cell (the same real electrochemistry as the direct-lithium-extraction example, sized up for this liquor's larger Li flow) converts Li+ to LiOH, which an MSMPR crystallizer takes to battery-grade LiOH solid. Every step reuses an already-real, independently-tested unit op (,,,) chained into the one train none of them had been assembled into before.

11 unit ops • BRINE

229 0

View & open

Stop fighting legacy software. Build your first flowsheet in 60 seconds.