MaximaLabs
Simulation gallery

Guemassa-type cobalt refinery, roast-leach route (representative): roaster, white arsenic, calcine leach, scorodite polish, Cu EW, Cyanex 272, Co EW, CoSO4, Ni(OH)2

HydrometallurgyPyrometallurgyRoastingCobaltArsenicArsenic trioxideScoroditeElectrowinningSolvent extractionNickelCobalt sulphate
See it live
Open this exact flowsheet in the workspace, already solved — tweak a spec and re-run.
Launch interactive model

The guemassa-cobalt-refinery flowsheet with a de-arsenication roast in front of the leach, which is how arsenide concentrates are usually treated: the direct leach has to buy more iron than the concentrate carries to fix its arsenic as scorodite. Everything from the scorodite stage on is the same nodes as the direct-leach example. The concentrate is REPRESENTATIVE: the roasting example's mineralogy (12% skutterudite, 8% cobaltite, 30% arsenopyrite, 5% pyrite, 45% quartz) with nickel and copper as NiO and CuO at the Bou Azzer concentrate's Ni/Co and Cu/Co (Johnson et al. 2020), 1.40 kg/s dry with 6% moisture, sized to carry the direct-leach example's 73.5 g/s of cobalt. The fluidized-bed roaster at 700 C and 30% excess air (95% of each arsenide roasted, pyrite 98%, inputs) releases 3.90 MW and rejects 1.46 MW to its coils; the off-gas carries 6.32% SO2. Cooled to 150 C, 0.46 kg/s of white arsenic condenses (98.84% of the arsenic in the gas, on Welch & Duschak's measured As4O6 vapour pressure); in all, 93.9% of the arsenic fed leaves as white arsenic, 1.1% stays in the gas, which goes to a product labelled 'to acid plant' (the acid plant is the roasting example's), and 5.0% stays in the calcine and dust, at 1.84% As. Calcine and dust are leached in sulfuric acid at 90 C, mineral by mineral (inputs: 95% of the Co3O4, NiO, CuO and unroasted sulfides and arsenides, 10% of the hematite; Co3O4 dissolving as Co(II) assumes a reductive leach whose reductant is not tracked), consuming 2.00 mol/s of acid. The liquor carries 978 mg/L As against 25,228 mg/L in the direct leach, and the iron the calcine dissolves puts its Fe:As at 1.82, so the scorodite stage buys no ferric iron (0.0 mol/s against 5.5 mol/s in the direct leach) and needs 0.18 mol/s of H2O2 (3.6), 3.60 mol/s of lime (11.18) and makes 0.05 kg/s of scorodite (1.40) and 0.61 kg/s of gypsum (1.92), leaving 0.03 mg/L As; its TCLP screen is 0.03 mg/L. The iron the scorodite does not need drops as ferrihydrite at pH 4 (0.021 kg/s). Downstream as in the direct-leach example: 95% of the copper plated, 0.5% of the nickel co-extracted by Cyanex 272, cobalt electrowon at 3.23 kWh/kg (0.022 kg/s of cathode), and CoSO4.7H2O at 0.185 kg/s, about 5,826 t/y at 95.2% purity. Bounds: the roast conversions, dust carry-over, collection efficiency and leach fractions are inputs; skutterudite and cobaltite run on DFT heats of formation (see the roasting example); nickel and copper enter as oxides because the roaster has no Ni or Cu minerals, so the arsenic of the nickel arsenides a real Bou Azzer concentrate carries is missing; oxygen in the leach is not tracked; the SO2 is not converted here.

The flowsheet

The solved topology — every unit op's real duty, conversion, or split, read straight off a genuine converged solve.

Concentrate
AIR
feed
air
gas
calc
dust
Roaster
AS Cooler
White Arsenic
SO2 TO ACID Plant
Calcine MIX
solid
acid
PLS
residue
Leach
Leach ACID
Leach Residue
H2O2
Ferric Sulfate
LIME 1
liq
ox
Fe
lime
liq
As
xs
AS Scorodite
Scorodite Residue
Unused Reagents 1
LIME 2
liq
ox
Fe
lime
liq
As
xs
FE AS Polish
Ferric Arsenate Residue
Unused LIME 2
electrolyte
spent
cathode
gas
EW CU
Copper Cathode
CU CELL GAS
Caustic
liquor
reagent
out
excess
Neutralizer
Unused Caustic
CO Organic FEED
feed
solv
ext
raff
SX CO
Strip Liquor
feed
solv
ext
raff
Strip
Barren Organic
electrolyte
spent
cathode
gas
EW CO
Cathode Cobalt
Spent Electrolyte
CO CELL GAS
feed
clarified
sludge
NI Precip
Nickel Hydroxide
Barren Liquor
Strip MIX
CO Split
Spent Split
Sulph MIX
EVAP
EVAP Water
feed
solid
liq
CO Cryst
Cobalt Sulphate
ML Split
Mother Liquor Bleed

The stream table

Every stream's flow, temperature, pressure, and composition — real converged numbers, not placeholders.

See it live
Open this exact flowsheet in the workspace, already solved — tweak a spec and re-run.
Launch interactive model

Stop fighting legacy software. Build your first flowsheet in 60 seconds.