MaximaLabs
Simulation gallery

Phosphogypsum: washing and neutralising the stack away

PhosphogypsumWashingNeutralisationBy-product
See it live
Open this exact flowsheet in the workspace, already solved — tweak a spec and re-run.
Launch interactive model

A dihydrate line throws 4.8 tonnes of phosphogypsum per tonne of P2O5, and what keeps it on a stack rather than in plasterboard or cement is not the gypsum but what rides with it: soluble P2O5, free acidity and fluoride in the cake's own moisture. This is the step that has to come first in any valorisation route -- the reactor's cake through a three-stage counter-current wash, with the pregnant liquor limed to pH 6 so it can leave as water rather than as pond acid. Solved on the shipped dihydrate line's own cake (2581 mol/s at 18.7 mol% gypsum, 0.49% H3PO4): the wash cuts the cake's soluble P2O5 by the counter-current washing equation this repo already uses for the reactor's own filter, and the liquor's acidity is titrated against lime on the aqueous speciation, so the lime dose is SOLVED rather than stated. Calcium, sulfur, phosphorus and fluorine each close over the boundary. HONESTY NOTES: (1) this makes a washed, neutral gypsum -- it does NOT make plaster. Calcination to stucco is CaSO4.2H2O -> CaSO4.0.5H2O + 1.5 H2O, a hydrate conversion whose stoichiometry the rotary kiln's reaction form cannot express (it substitutes one solid mole for one and births one gas mole), so the calciner is a named follow-up and not modelled here; (2) nor is the Merseburg route to ammonium sulfate; (3) radium and the rare earths that actually decide whether a phosphogypsum may be sold are not tracked -- no distribution data for either is bundled here, and that is the real regulatory gate in most jurisdictions; (4) the wash is ideal counter-current equilibrium washing (the reactor's own default), so a displacement-washing curve needs a leaf test, exactly as it does on the filter; (5) the lime is taken as fully dissolved, so the gypsum it precipitates is reported as a saturation index rather than removed; (6) this sheet declares h2so4 a carrier explicitly, because the databank's h2so4 record carries no CAS, so the carrier inference (which classifies by melting point) cannot find sulfuric acid's 277.3 K and conservatively leaves it as ore -- a real one-record data gap, named here rather than fixed, because giving sulfuric acid a melting point would move every shipped phosphoric filter's cake and deserves its own measurement.

The flowsheet

The solved topology — every unit op's real duty, conversion, or split, read straight off a genuine converged solve.

Gypsum CAKE
WASH Water
solid
liquor
wash
solids
liquor
Washer
LIME
liquor
reagent
out
excess
Neutraliser
Washed Gypsum
Neutral Effluent
Excess LIME

The stream table

Every stream's flow, temperature, pressure, and composition — real converged numbers, not placeholders.

See it live
Open this exact flowsheet in the workspace, already solved — tweak a spec and re-run.
Launch interactive model

Stop fighting legacy software. Build your first flowsheet in 60 seconds.