Plasmid DNA — E. coli fermentation to clarified lysate
The front end of every plasmid DNA process — the template mRNA vaccines are transcribed from, and the DNA many diagnostics and gene therapies are built on: fermentation → harvest → alkaline lysis. 1 m³/h of medium carrying 20 g/L glucose grows E. coli to 10 g/L dry cells at a 0.25 1/h dilution rate, each cell holding 5 mg plasmid per g dry weight (49 g/h of plasmid). The cells are harvested and resuspended, then lysed the Birnboim-Doly way: P2 (0.2 M NaOH, 1% SDS) and P3 (3 M potassium acetate brought to pH 5.5 with acetic acid), 10 L each per kg of wet cells.
What the lysis block computes rather than takes as given: the pH the NaOH sets during lysis, 12.51 at 37 °C (the classical denaturation window is pH 12-12.5, above which supercoiled plasmid starts to denature for good), the pH after neutralization, 5.79, both from the same aqueous speciation the neutralizer uses; the potassium dodecyl sulfate the neutralization precipitates, 4.2 kg/h, which is what traps the genomic DNA and debris; and the clarified lysate, 1.07 m³/h at 37 mg/L plasmid — a threefold dilution of the resuspended cells, which is what sizes the clarification and the UF/DF step after it.
What it takes as measured inputs, because they are: the fraction of plasmid that survives into the lysate (here 80%) and the fraction of the biomass that flocculates (95%). Both depend on the host, the plasmid and above all on how the lysate is mixed — shear fragments genomic DNA into pieces small enough to slip through the floc — and no correlation predicts them; the values here are illustrative. The fermentation is a chemostat, a continuous stand-in for the fed-batch a real plasmid process runs (use the fed-batch tool for the transient); the Monod constants are typical E. coli-on-glucose values, illustrative too. The lysis pH is the NaOH alone (P1's Tris and the cells' own buffering pull it a little lower), activity coefficients are screening-grade at the ~1 M ionic strength after P3, and the reagent salts are reported rather than carried as components. Downstream (TFF, anion-exchange capture, polishing) uses the same blocks as the mAb train.
The flowsheet
The solved topology — every unit op's real duty, conversion, or split, read straight off a genuine converged solve.
The stream table
Every stream's flow, temperature, pressure, and composition — real converged numbers, not placeholders.