MaximaLabs
All examples
Simulation gallery

Pressure-swing azeotropic distillation (methanol/acetone)

Pressure-swing distillationAzeotropeTwo-column train
See it live
Open this exact flowsheet in the workspace, already solved — tweak a spec and re-run.
Launch interactive model

Methanol and acetone form a minimum-boiling azeotrope whose composition shifts noticeably with pressure — enough that two ordinary columns run at different pressures can cross the azeotrope without an entrainer. Column 1 (low pressure) takes pure acetone bottoms and a near-azeotropic overhead; that overhead is compressed into Column 2 (high pressure), whose new, shifted azeotrope composition lets pure methanol come off the bottoms (the recycle of Column 2's now off-azeotrope overhead back to Column 1 is reported as a product here rather than closed, the same open-loop simplification the acetone-water example already uses). Luyben, Ind. Eng. Chem. Res. 2008, 47, 2696.

The flowsheet

The solved topology — every unit op's real duty, conversion, or split, read straight off a genuine converged solve.

FEED
feed
dist
btms
Qc
Qr
Lpcol
Acetone
COMP
feed
dist
btms
Qc
Qr
Hpcol
Recycle TO LP
Methanol

The stream table

Every stream's flow, temperature, pressure, and composition — real converged numbers, not placeholders.

See it live
Open this exact flowsheet in the workspace, already solved — tweak a spec and re-run.
Launch interactive model

Stop fighting legacy software. Build your first flowsheet in 60 seconds.