MaximaLabs

Arsenic trioxide condenser (cooler + baghouse) simulation

roaster gas -> cleaned gas, crude As2O3 product

Governing equations

The exact equations the solver works for a arsenic trioxide condenser (cooler + baghouse) — the same math shown in the app's "Theory" panel, not a black box.

yAs4O6,out≤psat(T)Py_{As_4O_6,out} \le \frac{p_{sat}(T)}{P}
ln⁡psat=A−BT+Cln⁡T\ln p_{sat} = A - \frac{B}{T} + C\ln T
RAs=ηc FAs,in−FAs,vapFAs,inR_{As} = \eta_c\,\frac{F_{As,in} - F_{As,vap}}{F_{As,in}}
yAs4O6,outy_{As_4O_6,out}
As4O6 mole fraction in the outlet gas [-]
psat(T)p_{sat}(T)
As4O6 vapour pressure over solid As2O3 [Pa]
PP
gas pressure [Pa]
psatp_{sat}
As4O6 vapour pressure [Pa]
AA
fit constant, 70.339 (Welch & Duschak 1915) [-]
BB
fit constant, 15963 [K]
CC
fit constant, -5.2151 [-]
TT
gas outlet temperature [K]
RAsR_{As}
arsenic recovered to the product [-]
ηc\eta_c
collection efficiency of the baghouse [-]
FAs,inF_{As,in}
As4O6 in the gas [mol/s]
FAs,vapF_{As,vap}
As4O6 left in the gas as vapour [mol/s]

Parameters

roaster gas cooled to a set temperature; As4O6 above its vapour pressure over solid As2O3 (Welch & Duschak 1915, USBM TP 81, 100-300 C) condenses and is collected. temperature [K] (required, gas outlet); collection_efficiency [-] (fraction of the condensed fume and of any dust captured, default 1 = ideal baghouse); pressure_drop [Pa] (default 0). Reports arsenic recovery (and at 100-250 C), the outlet As2O3 in mg/Nm3, crude As2O3 grade, the vapour pressure and the sublimation heat

Example flowsheets that use it

Stop fighting legacy software. Build your first flowsheet in 60 seconds.