MaximaLabs

Gold electrowinning (cyanide) simulation

eluate -> barren electrolyte + gold sludge (cathode)

Governing equations

The exact equations the solver works for a gold electrowinning (cyanide) — the same math shown in the app's "Theory" panel, not a black box.

Au(CN)2−+e−→Au+2 CN−Au(CN)_2^- + e^- \rightarrow Au + 2\,CN^-
R=1−exp⁡(−kma VQ)R = 1 - \exp\left(-\frac{k_m a\,V}{Q}\right)
I=F n˙AuηCEI = \frac{F\,\dot n_{Au}}{\eta_{CE}}
Erev=EO2/OH−∘−EAu(CN)2−/Au∘E_{rev} = E^{\circ}_{O_2/OH^-} - E^{\circ}_{Au(CN)_2^-/Au}
RR
single-pass recovery [-]
kmak_m a
mass-transfer coefficient x area [1/s]
VV
cathode volume [m3]
QQ
eluate flow [m3/s]
II
current [A]
FF
Faraday constant [C/mol]
n˙Au\dot n_{Au}
gold plated [mol/s]
ηCE\eta_{CE}
current efficiency [-]
ErevE_{rev}
reversible cell voltage [V]
EO2/OH−∘E^{\circ}_{O_2/OH^-}
0.401 V
EAu(CN)2−/Au∘E^{\circ}_{Au(CN)_2^-/Au}
-0.60 V

Parameters

gold (and silver) plated from an alkaline cyanide eluate on a steel-wool cathode, Au(CN)2- + e- -> Au + 2CN- (E 0 -0.60 V) against O2 evolution (+0.401 V), H2 as the side reaction. mass_transfer_coefficient_area [1/s] and cell_volume [m3] (required: R = 1 - exp(-k_m a V/Q) plug flow, or the CSTR form); reactor_model (plug_flow | cstr); n_cells [-] (default 1); current_efficiency [-], or current [A], or current_density [A/m2] with cathode_area [m2] (exactly one); cell_voltage [V] (optional, power [W] and kWh/kg reported; below the reversible 1.001 V refused); solution_density [kg/m3] (default 1000). H2 and O2 are reported, not streams

Example flowsheets that use it

Stop fighting legacy software. Build your first flowsheet in 60 seconds.