MaximaLabs

Carbon elution (AARL / pressure) simulation

loaded carbon + caustic-cyanide eluent -> barren carbon, eluate

Governing equations

The exact equations the solver works for a carbon elution (aarl / pressure) — the same math shown in the app's "Theory" panel, not a black box.

ηAu=ηcaseor1−Cc,barren/Cc,loaded\eta_{Au} = \eta_{case}\quad\text{or}\quad 1 - C_{c,barren}/C_{c,loaded}
BV=m˙eluent/ρeluentm˙C/ρbulkBV = \frac{\dot m_{eluent}/\rho_{eluent}}{\dot m_C/\rho_{bulk}}
ηAu\eta_{Au}
gold elution efficiency [-]
ηcase\eta_{case}
the published case's recovery [-]
Cc,barrenC_{c,barren}
gold on barren carbon [mg/kg]
Cc,loadedC_{c,loaded}
gold on loaded carbon [mg/kg]
BVBV
bed volumes of eluent [-]
m˙eluent\dot m_{eluent}
eluent [kg/s]
ρeluent\rho_{eluent}
eluent density [kg/m3]
m˙C\dot m_C
carbon [kg/s]
ρbulk\rho_{bulk}
carbon bulk density [kg/m3]

Parameters

strips gold (and silver) from loaded carbon with a hot caustic-cyanide eluent. elution_case (aarl_90c | aarl_90c_1bv_h | aarl_90c_2bv_h | aarl_pressure_125c: Davidson & Duncanson 1977's measured AARL cases, 99.0 / 97.3 / 90.8 / 99.2% gold), or gold_elution_efficiency [-], or barren_carbon_target [mg/kg]; silver_elution_efficiency [-]; carbon_bulk_density [kg/m3] (required, counts the bed volumes; 330-500 per Davidson et al. 1979); eluent_density [kg/m3] (default 1000); temperature [K] (default the case's). Fewer bed volumes than the case measured at is flagged; heating duty not computed

Example flowsheets that use it

Stop fighting legacy software. Build your first flowsheet in 60 seconds.