MaximaLabs

HPGR (roll press) simulation

solids -> product (+ edge, with edge_product)

Governing equations

The exact equations the solver works for a hpgr (roll press) — the same math shown in the app's "Theory" panel, not a black box.

F=Fsp D Wm˙s=m˙D W u    (specific force and specific throughput, by definition)F = F_{sp}\,D\,W \qquad \dot m_s = \frac{\dot m}{D\,W\,u}\;\;(\text{specific force and specific throughput, by definition})
pzone=exp⁡ ⁣((B−I) S k)f    (one compression pass)p_{zone} = \exp\!\big((B-I)\,S\,k\big) f \;\;(\text{one compression pass})
p=(1−fe) pcentre(k)+fe pedge(r k)    (edge effect)p = (1-f_e)\,p_{centre}(k) + f_e\,p_{edge}(r\,k)\;\;(\text{edge effect})
P=Esp m˙orP=2 F kt uP = E_{sp}\,\dot m \quad\text{or}\quad P = 2\,F\,k_t\,u
F,FspF, F_{sp}
roll force [N] and specific pressing force [N/mm^2] — a roll press is specified by the second, and the first follows from it and the roll area
D,W,uD, W, u
roll diameter [m], roll width [m] and surface speed [m/s]
m˙,m˙s\dot m, \dot m_s
throughput [kg/s] and the specific throughput constant it demands [t.s/(h.m^3)] — the machine's own capacity number
B,SB, S
breakage matrix and selection rates — where fragments land, and how fast each size breaks (measured per ore)
k,rk, r
compression intensity, and the ratio by which the edge slice is less compressed
fef_e
edge fraction — the share of throughput escaping full confinement at the roll ends
Esp,ktE_{sp}, k_t
measured specific energy [kWh/t], or the machine's dimensionless torque factor

Parameters

High-pressure grinding rolls: one compression pass through a confined bed, with the edge effect. Geometry roll_diameter_m, roll_width_m, roll_speed_m_s [all required] and specific_pressing_force_n_mm2 [required] — the roll force F = F_sp*D*W and the specific throughput m_s = m/(D*W*u) [t.s/(h.m^3)] follow from them by definition, and the specific throughput the FEED demands is reported; throughput_constant_ts_hm3 [the machine's own constant] flags a feed past its rated capacity. Size reduction by exactly one of target_p80_m [m] or breakage_intensity; optional Austin breakage_phi/gamma/beta and selection_alpha/selection_mu_m/selection_lambda (measure them with /api/analysis/breakage-fit). edge_fraction [0..1] with edge_intensity_ratio [0..1, how much less the edge slice is compressed] gives the coarser edge product; edge_product draws it off as a second outlet so it can be recycled. Power from specific_energy_kwh_t [a piston-press or pilot measurement] or torque_factor [dimensionless, P = 2*F*k*u]; with neither, no power is reported rather than one invented. work_index_reduction [0..1] is carried to the report, never predicted — micro-cracking is measured downstream. molar_mass [kg/mol]

Stop fighting legacy software. Build your first flowsheet in 60 seconds.