MaximaLabs

Waelz kiln simulation

residue + coke breeze + lime (feed) + air -> clinker, Waelz oxide, off-gas

Governing equations

The exact equations the solver works for a waelz kiln — the same math shown in the app's "Theory" panel, not a black box.

ZnO+C→Zn(g)+CO,Zn(g)+12O2→ZnOZnO + C \rightarrow Zn(g) + CO,\qquad Zn(g) + \tfrac12 O_2 \rightarrow ZnO
Fe2O3+3C→2Fe+3CO,CO+12O2→CO2Fe_2O_3 + 3C \rightarrow 2Fe + 3CO,\qquad CO + \tfrac12 O_2 \rightarrow CO_2
RZn=FZn,oxideFZn,feed,gZn=MZnFZn,oxidem˙oxideR_{Zn} = \frac{F_{Zn,oxide}}{F_{Zn,feed}},\quad g_{Zn} = \frac{M_{Zn} F_{Zn,oxide}}{\dot m_{oxide}}
Q=∑outFihi−∑inFihiQ = \sum_{out} F_i h_i - \sum_{in} F_i h_i
RZnR_{Zn}
zinc recovered to the Waelz oxide [-]
FZn,oxideF_{Zn,oxide}
zinc in the Waelz oxide [mol/s]
FZn,feedF_{Zn,feed}
zinc fed [mol/s]
gZng_{Zn}
Waelz oxide zinc grade [-]
MZnM_{Zn}
zinc molar mass [kg/mol]
m˙oxide\dot m_{oxide}
Waelz oxide [kg/s]
QQ
kiln heat balance (positive: fuel) [W]
FiF_i
molar flow [mol/s]
hih_i
molar enthalpy on the formation basis [J/mol]

Parameters

zinc and lead fumed from a residue (EAF dust, leach residue) by coke and reoxidised to Waelz oxide (EU BREF NFM 2017 6.1.2.3). temperature [K] (required, clinker); gas_temperature [K] (oxide and gas, default the clinker's); zinc_volatilization [-] (required when zinc is fed); lead_volatilization [-] (required when lead oxide is fed); iron_metallization [-] (default 0); coke_burn_fraction [-] (spare coke burnt, default 0); dust_carryover [-] (clinker blown to the oxide, default 0); molar_masses [kg/mol] (backend-filled, inert solids). Reports zinc and lead recovery, Waelz oxide Zn/Pb grade, clinker Zn, carbon and metallic iron, coke per Zn fumed and its stoichiometric ratio, bed reduction heat

Example flowsheets that use it

Stop fighting legacy software. Build your first flowsheet in 60 seconds.