MaximaLabs

Arsenic precipitation (scorodite) simulation

liquor + oxidant + ferric sulfate + lime -> liquor, arsenic residue, unused reagents

Governing equations

The exact equations the solver works for a arsenic precipitation (scorodite) — the same math shown in the app's "Theory" panel, not a black box.

n˙ox=2 n˙As(III)+n˙Fe(II)zox uox\dot n_{ox} = \frac{2\,\dot n_{As(III)} + \dot n_{Fe(II)}}{z_{ox}\,u_{ox}}
FeAsO4⋅2H2O⇌Fe3++AsO43−+2H2O,{Fe3+}{AsO43−}=KspFeAsO_4\cdot 2H_2O \rightleftharpoons Fe^{3+} + AsO_4^{3-} + 2H_2O,\quad \{Fe^{3+}\}\{AsO_4^{3-}\} = K_{sp}
Fe(OH)3+3H+⇌Fe3++3H2O,{Fe3+}=Kfh{H+}3Fe(OH)_3 + 3H^+ \rightleftharpoons Fe^{3+} + 3H_2O,\quad \{Fe^{3+}\} = K_{fh}\{H^+\}^3
∑izici=0  ⇒  n˙lime\sum_i z_i c_i = 0 \;\Rightarrow\; \dot n_{lime}
cAs,TCLP=cAseq(pH 4.93, 20 L/kg)<5 mg/Lc_{As,TCLP} = c_{As}^{eq}(pH\ 4.93,\ 20\ L/kg) < 5\ mg/L
n˙ox\dot n_{ox}
oxidant drawn [mol/s]
n˙As(III)\dot n_{As(III)}
arsenite to oxidise [mol/s]
n˙Fe(II)\dot n_{Fe(II)}
ferrous iron to oxidise [mol/s]
zoxz_{ox}
electrons per mole of oxidant (H2O2 2, O2 4) [-]
uoxu_{ox}
oxidant utilization [-]
KspK_{sp}
ferric arsenate solubility product (scorodite 10^-25.83) [-]
KfhK_{fh}
ferrihydrite constant (10^4.891) [-]
ziz_i
ion charge [-]
cic_i
species concentration [mol/L]
n˙lime\dot n_{lime}
Ca(OH)2 dose that holds the pH setpoint [mol/s]
cAs,TCLPc_{As,TCLP}
equilibrium As in EPA 1311 fluid #1 [mg/L]

Parameters

oxidises As(III) (h3aso3) to As(V) (h3aso4) with H2O2 or O2 on port 'oxidant' (stoichiometric: 2 e- per As, 1 per Fe(II)), then fixes As(V) as scorodite FeAsO4.2H2O (route 'scorodite', log Ksp -25.83), amorphous ferric arsenate with ferrihydrite (route 'ferric_arsenate', -23.0; Langmuir, Mahoney & Rowson 2006) or calcium arsenate (route 'calcium_arsenate', LLNL log K 17.816). route [-] (default scorodite); ph [-] (required with lime on port 'base': the lime dose is solved on the charge balance, the excess goes to gypsum; without a base the pH is what the precipitation leaves); fe_as_ratio [-] (molar Fe/As in the reactor, drawn from ferric sulfate on port 'iron'); oxidant_utilization [-] (default 1); temperature [K]; pressure [Pa]; solution_density_kg_m3 [kg/m3] (default 1000). Reports residual As [mg/L], As removal, Fe:As in feed/reactor/residue, residue/arsenate/gypsum [kg/s], oxidant/iron/lime consumption and an equilibrium TCLP screen against 5 mg/L. 25 C constants, Davies activities, no adsorption on ferrihydrite

Example flowsheets that use it

Stop fighting legacy software. Build your first flowsheet in 60 seconds.