Styrene monomer via ethylbenzene dehydrogenation — a PENG-ROBINSON process flowsheet
Ethylbenzene dehydrogenates over an equilibrium/conversion reactor to styrene monomer plus hydrogen — the endothermic reaction that supplies the world's polystyrene/SBR-rubber feedstock. A downstream column recovers unreacted ethylbenzene overhead for recycle while polymer-grade styrene leaves the bottoms. Vasudevan design, Ind. Eng. Chem. Res. 2009, 48, 10941 (Figure 15.1).
167 views 0 forks
- Rigorous PENG-ROBINSON thermodynamics, solved by the same engine every simulation runs on.
- 3 unit operations modeled: RXN, SEP, COL.
- Focus areas: Dehydrogenation, Reactor, Styrene, Polymer feedstock.
- Thermodynamics
- PENG-ROBINSON
- Components
- ethylbenzene, styrene, h2
- Unit operations
- RXNSEPCOL
Opens in a new tab, loaded straight into the app — no setup.
Read the step-by-step guideReproduce this exact result from Python — the real client.get_example() → run_and_wait() path, not a mockup.
from flowsim.sdk import FlowSimClient
client = FlowSimClient()
example = client.get_example("styrene-monomer")
sim = client.create_simulation(example["title"], example["flowsheet"])
result = client.run_and_wait(sim["id"])
print(result["status"]) # "converged"
streams = client.streams(sim["id"])Related models
Integrated styrene chain: benzene to styrene monomer
The full two-step styrene chain connected as one flowsheet rather than two standalone process snippets: benzene alkylated with ethylene to ethylbenzene, purified in a recovery column, then fed directly to the dehydrogenation reactor that makes styrene monomer. The unreacted ethylbenzene the dehydrogenation column recovers is reported as its own product stream rather than recycled back onto the alkylation feed (an honest simplification — closing that loop needs a torn-recycle edge back into ALKCOL, which the plant does but this flowsheet does not).
LOHC hydrogen release (methylcyclohexane dehydrogenation)
A liquid organic hydrogen carrier (LOHC) power train: methylcyclohexane (MCH) is preheated and catalytically dehydrogenated (MCH → toluene + 3H2, endothermic, equilibrium-limited to ~90% single-pass conversion) to release hydrogen for downstream power generation. A flash drum separates the H₂-rich gas from the liquid; a distillation column then recovers the unreacted MCH overhead and recycles it to the reactor feed, closing a real tight liquid recycle loop, while spent toluene leaves the bottoms (to be re-hydrogenated back to MCH off-site, closing the supply-chain loop — out of scope for this dehydrogenation-side flowsheet). Screening-fidelity note: MCH and toluene are genuinely close-boiling (relative volatility ~1.4 under this thermo package at column conditions), so the recycle carries real toluene along with the recovered MCH rather than a sharp cut — a production column would use more stages to purify it further; this shows the recycle topology and its convergence, not an optimized column design.
Hydrocracking reaction section
A refinery hydrocracker: heavy VGO (modeled as n-dodecane) plus excess H₂ is cracked over catalyst into lighter products via a discrete lumped first-order kinetic network, then flashed to knock out recycle H₂/light gas from the liquid product (Peng-Robinson). Conversion is set by reactor temperature and LHSV.
Benzene hydrogenation → cyclohexane
Benzene + 3 H₂ → cyclohexane in a conversion reactor, then a high-pressure flash recovers liquid cyclohexane and recycles the excess hydrogen (with a purge). The classic ChemSep recycle example — exercises reaction + recycle convergence.
Propane dehydrogenation cold box
Propane dehydrogenation (PDH) to propylene over a Pt/Cr catalyst, followed by a cold-box separation recovering liquid propylene from the H₂-rich reactor off-gas, after US Patent 6,333,445 (Chart Inc., 2002). The refrigeration loop itself is not modeled — the cold box is represented here as a net cooling duty to condense the propylene, a bounded simplification. Unreacted propane recycle is not modeled either (reported as its own product stream).
Methyl ethyl ketone from 2-butanol dehydrogenation
Catalytic dehydrogenation of 2-butanol to methyl ethyl ketone (MEK) over an In/MgO catalyst, per DE2831465A1 (1978), followed by a flash to remove the H₂ co-product and a distillation splitting MEK from unreacted 2-butanol.